This document describes ValueRAM’s KVR24N17S8/4 is a 512M
x 64-bit (4GB) DDR4-2400 CL17 SDRAM (Synchronous DRAM),
1Rx8, memory module, based on eight 512M x 8-bit FBGA
components. The SPD is programmed to JEDEC standard
latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin
DIMM uses gold contact fingers. The electrical and mechanical
specifications are as follows:
• Power Supply: VDD=1.2V Typical
• VDDQ = 1.2V Typical
• VPP – 2.5V Typical
• VDDSPD=2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.23” (31.25mm)
• RoHS Compliant and Halogen-Free
Kingston, RAM
RAM KINGSTON 4GB DDR4 2400Mhz CL17 Longdimm KVR24N17S8/4
Rp260.000
Note :
+ Cek stock terlebih dahulu sebelum order (Ketersedian Terbatas)
+ Gambar hanya ilustrasi, versi produk dapat berbeda tergantung kebijakan vendor, namun tidak mengurangi spesifikasi dan fungsi produk
+ Request warna, ukuran dll. Wajib cantumkan pada keterangan saat order, Jika tidak maka unit kami kirim secara random
+ Simpan dus dan invoice pembelian untuk klaim garansi
Order Via:
Berat | 0,25 kg |
---|